Linux Foundation CKA勉強方法 & CKA全真問題集

ちなみに、PassTest CKAの一部をクラウドストレージからダウンロードできます:https://drive.google.com/open?id=1Ng8tlERMOLbze_G38z_YmxuFNpxIA7-D

中国でこのような諺があります。天がその人に大任を降さんとする時、必ず先ず困窮の中におきてその心志を苦しめ、その筋骨を労し、その体膚を餓やし、その身を貧困へと貶めるのである。この話は現在でも真です。しかし、成功には方法がありますよ。正確な選択をしたら、そんなに苦労しなくても成功することもできます。PassTestのLinux FoundationのCKA試験トレーニング資料はIT職員を対象とした特別に作成されたものですから、IT職員としてのあなたが首尾よく試験に合格することを助けます。もしあなたは試験に準備するために知識を詰め込み勉強していれば、間違い方法を選びましたよ。こうやってすれば、時間とエネルギーを無駄にするだけでなく、失敗になるかもしれません。でも、今方法を変えるチャンスがあります。早くPassTestのLinux FoundationのCKA試験トレーニング資料を買いに行きましょう。その資料を手に入れたら、異なる人生を取ることができます。運命は自分の手にあることを忘れないでください。

電子デバイスでの学習は、実際の研究に触れることに反します。 CKA試験ダンプは、CKA試験教材の世界有数のプロバイダーの1つとして知られています。便宜上、今後の参考のためにいくつかのデモを提供しており、それらのダウンロードに対して料金を請求しないことをお約束します。したがって、ダウンロードしてCKA試験をお試しください。その後、CKAテストの質問を使用することが適切かどうかがわかります。ダウンロードに問題がある場合は、必ずサービスにアクセスしてください。

>> Linux Foundation CKA勉強方法 <<

有効的なCKA勉強方法 | 最初の試行で簡単に勉強して試験に合格する & 専門的なCKA: Certified Kubernetes Administrator (CKA) Program Exam


PassTestは、他の競合他社とは異なるWebサイトです。すべての受験者に貴重なCKA試験問題を提供し、CKA試験に合格するのが難しい人を支援することを目的としています。一部のWebサイトのような質の悪いCKA試験資料を提供しないだけでなく、一部のWebサイトと同じ高価格もありません。当社のウェブサイトからCKA学習問題集を試してみたい場合、それはあなたのお金のための最も効果的な投資でなければなりません。

Linux Foundation Certified Kubernetes Administrator (CKA) Program Exam 認定 CKA 試験問題 (Q21-Q26):


質問 # 21
Create a hostPath PersistentVolume named task-pv-volume with storage 10Gi, access modes ReadWriteOnce, storageClassName manual, and volume at /mnt/data and verify

  • A. vim task-pv-volume.yaml
    apiVersion: v1
    kind: PersistentVolume
    metadata:
    name: task-pv-volume
    labels:
    type: local
    spec:
    storageClassName: ""
    capacity:
    storage: 5Gi
    accessModes:
    - ReadWriteOnce
    hostPath:
    path: "/mnt/data"
    kubectl apply -f task-pv-volume.yaml
    //Verify
    kubectl get pv
    NAME CAPACITY ACCESS
    MODES RECLAIM POLICY STATUS CLAIM
    STORAGECLASS REASON AGE
    task-pv-volume 4Gi RWO
    Retain Available
    8s

  • B. vim task-pv-volume.yaml
    apiVersion: v1
    kind: PersistentVolume
    metadata:
    name: task-pv-volume
    labels:
    type: local
    spec:
    storageClassName: ""
    capacity:
    storage: 5Gi
    accessModes:
    - ReadWriteOnce
    hostPath:
    path: "/mnt/data"
    kubectl apply -f task-pv-volume.yaml
    //Verify
    kubectl get pv
    NAME CAPACITY ACCESS
    MODES RECLAIM POLICY STATUS CLAIM
    STORAGECLASS REASON AGE
    task-pv-volume 5Gi RWO
    Retain Available
    3s


正解:B

 

質問 # 22
Deploy a pod with image=redis on a node with label disktype=ssd

  • A. // Get list of nodes
    kubectl get nodes
    //Get node with the label disktype=ssd
    kubectl get no -l disktype=ssd
    // Create a sample yaml file
    kubectl run node-redis --generator=run-pod/v1 --image=redis --dry
    run -o yaml > test-redis.yaml
    // Edit test-redis.yaml file and add nodeSelector
    vim test-redis.yaml
    apiVersion: v1
    - name: node-redis
    image: redis
    imagePullPolicy: IfNotPresent
    kubectl apply -f test-redis.yaml
    / // Verify
    K kubectl get po -o wide

  • B. // Get list of nodes
    kubectl get nodes
    //Get node with the label disktype=ssd
    kubectl get no -l disktype=ssd
    // Create a sample yaml file
    kubectl run node-redis --generator=run-pod/v1 --image=redis --dry
    run -o yaml > test-redis.yaml
    // Edit test-redis.yaml file and add nodeSelector
    vim test-redis.yaml
    apiVersion: v1
    kind: Pod
    metadata:
    name: redis
    spec:
    nodeSelector:
    disktype: ssd
    containers:
    - name: node-redis
    image: redis
    imagePullPolicy: IfNotPresent
    kubectl apply -f test-redis.yaml
    / // Verify
    K kubectl get po -o wide


正解:B

 

質問 # 23
Create and configure the service front-end-service so it's accessible through NodePort and routes to the existing pod named front-end.

正解:

解説:
See the solution below.
Explanation
solution


 

質問 # 24
For this item, you will have to ssh to the nodes ik8s-master-0 and ik8s-node-0 and complete all tasks on these nodes. Ensure that you return to the base node (hostname: node-1) when you have completed this item.
Context
As an administrator of a small development team, you have been asked to set up a Kubernetes cluster to test the viability of a new application.
Task
You must use kubeadm to perform this task. Any kubeadm invocations will require the use of the
--ignore-preflight-errors=all option.
* Configure the node ik8s-master-O as a master node. .
* Join the node ik8s-node-o to the cluster.

正解:

解説:
See the solution below.
Explanation
solution
You must use the kubeadm configuration file located at /etc/kubeadm.conf when initializingyour cluster.
You may use any CNI plugin to complete this task, but if you don't have your favourite CNI plugin's manifest URL at hand, Calico is one popular option: https://docs.projectcalico.org/v3.14/manifests/calico.yaml Docker is already installed on both nodes and has been configured so that you can install the required tools.

 

質問 # 25
Create 2 nginx image pods in which one of them is labelled with env=prod and another one labelled with env=dev and verify the same.

正解:

解説:
See the solution below.
Explanation
kubectl run --generator=run-pod/v1 --image=nginx -- labels=env=prod nginx-prod --dry-run -o yaml > nginx-prodpod.yaml Now, edit nginx-prod-pod.yaml file and remove entries like "creationTimestamp: null"
"dnsPolicy: ClusterFirst"
vim nginx-prod-pod.yaml
apiVersion: v1
kind: Pod
metadata:
labels:
env: prod
name: nginx-prod
spec:
containers:
- image: nginx
name: nginx-prod
restartPolicy: Always
# kubectl create -f nginx-prod-pod.yaml
kubectl run --generator=run-pod/v1 --image=nginx --
labels=env=dev nginx-dev --dry-run -o yaml > nginx-dev-pod.yaml
apiVersion: v1
kind: Pod
metadata:
labels:
env: dev
name: nginx-dev
spec:
containers:
- image: nginx
name: nginx-dev
restartPolicy: Always
# kubectl create -f nginx-prod-dev.yaml
Verify :
kubectl get po --show-labels
kubectl get po -l env=prod
kubectl get po -l env=dev

 

質問 # 26
......

PassTestが提供したLinux FoundationのCKAトレーニング資料はシミュレーションの度合いがとても高いでから、実際の試験で資料での同じ問題に会うことができます。これは当社のITエリートの団体はすごい能力を持っていることが説明されました。現在、野心家としてのIT職員がたくさんいて、自分の構成ファイルは市場の需要と互換性があることを確保するために、人気があるIT認証試験を通じて自分の夢を実現します。そのようなものとして、Linux FoundationのCKA試験はとても人気がある認定試験です。PassTestが提供したLinux FoundationのCKAトレーニング資料を手にすると、夢への扉はあなたのために開きます。

CKA全真問題集: https://www.passtest.jp/Linux-Foundation/CKA-shiken.html

Linux Foundation CKA勉強方法 当社の製品は、すべての可能性のある問題を試させられます、Linux Foundation CKA勉強方法 また、いつでもご連絡いただけます、Linux Foundation CKA勉強方法 良いターゲットのトレーニングを利用すれば有効で君のIT方面の大量の知識を補充 できます、CKA全真問題集 - Certified Kubernetes Administrator (CKA) Program Examガイドトレントには、時間管理とシミュレーションテスト機能が装備されています、Linux Foundation CKA勉強方法 弊社が提供した製品は一部の無料試用資料がありますから、購入する前にあなたのテストの質と適用性を保証します、お客様の利益を保障するために、弊社のCKA問題集は全部Credit Cardで支払われることができます。

特に大きくもないし、乳首もピンク色ではなかったし、歳のせいかハリもなくな(https://www.passtest.jp/Linux-Foundation/CKA-shiken.html)ってきている、紀里谷社長あのひと、何を考えているのだろう、当社の製品は、すべての可能性のある問題を試させられます、また、いつでもご連絡いただけます。

信頼できるCKA勉強方法と真実的なCKA全真問題集


良いターゲットのトレーニングを利用すれば有効で君のIT方面の大量の知識を補充 できます、Certified Kubernetes Administrator (CKA) Program Exam CKA勉強方法ガイドトレントには、時間管理とシミュレーションテスト機能が装備されています、弊社が提供した製品は一部の無料試用資料がありますから、購入する前にあなたのテストの質と適用性を保証します。

P.S.PassTestがGoogle Driveで共有している無料の2024 Linux Foundation CKAダンプ:https://drive.google.com/open?id=1Ng8tlERMOLbze_G38z_YmxuFNpxIA7-D

Leave a Reply

Your email address will not be published. Required fields are marked *